Heating & cooling

Split System vs Ducted Air Con for Melbourne Homes

19 October 2026 · 5 min read

Split system or ducted? It's the first big decision when you're choosing reverse-cycle air con. Both heat and cool well. The right one comes down to your home, how you live in it and what you want to spend.

The quick difference between split and ducted air con

A split system has an outdoor unit connected to an indoor head mounted on the wall of one room. Each head heats or cools the space it's in.

A ducted system has one outdoor unit and an indoor unit tucked away in the roof space or under the floor. Air travels through insulated ducts to vents in each room, and you control it from a wall controller or an app.

Both are reverse-cycle, which means they're heat pumps. They move heat rather than burning fuel to create it, so they're an efficient way to heat and cool a Melbourne home all year round.

Costs in relative terms

We won't throw prices around here, because every home is different and a number without context isn't much help. But in relative terms:

  • Upfront: a single split system is usually the most affordable way to get reverse-cycle heating and cooling into one room. Ducted costs more upfront because there's more equipment, ductwork and labour involved.
  • Whole-home coverage: once you start adding splits to several rooms, the gap narrows. Several splits can end up in a similar territory to a ducted system, depending on the home.
  • Running costs: splits can be cheap to run because you only heat or cool the rooms you're in. Ducted systems with good zoning can be efficient too. Leaving a ducted system on for the whole house when you're only using two rooms is where running costs creep up.

Rebates can also shift the maths, especially if you're replacing old gas heating. Amounts and eligibility change, so check our rebate checker or ask us for an up-to-date picture.

Zoning: heating and cooling only the rooms you use

Zoning is a big part of how efficient either option feels day to day.

With ducted, zoning lets you split the home into areas, such as living and bedrooms, and switch them on and off independently. In winter you might heat the living zone in the evening, then switch to the bedrooms before bed. Good zoning makes a ducted system much more economical, so it's worth getting the zone layout right at the design stage.

With splits, every room is naturally its own zone. Each head has its own remote or app control and its own temperature setting. That's handy in households where people like their rooms at different temperatures.

Aesthetics and noise

Ducted is the clear winner on looks. All you see is a slim vent in the ceiling or floor and a controller on the wall. The outdoor unit sits outside, and the indoor unit is out of sight. If you've just renovated or prefer clean walls, that matters.

Split system heads are compact and modern, but they're still visible on the wall. Placement is something we plan carefully so the head sits where it works well and looks tidy, with pipework run as neatly as the home allows.

Both are quiet when installed properly. A well-designed ducted system can feel especially unobtrusive because the indoor unit is out of the living space.

How your house layout affects the choice

The building itself often makes the decision for you.

Roof space. Ducted needs room for the indoor unit and ducts, either in the roof or under the floor. Homes with very low-pitched or flat roofs, or tight subfloors, can make ducting tricky.

Open plan vs separate rooms. A big open-plan living area can often be handled well by one larger split. A home with lots of separate rooms and a hallway is usually easier and more even to condition with ducted.

Double storey. Two-storey homes sometimes need two ducted systems, or a ducted system for one level with splits on the other. Heat rises, so upstairs bedrooms can need extra attention in summer.

Apartments and townhouses. Splits are often the practical choice where roof access is limited or body corporate rules apply to outdoor units.

Multi-head split systems

A multi-head split connects several indoor heads to one outdoor unit. It's a middle ground worth knowing about.

It means fewer outdoor units cluttering your yard or wall, which helps on smaller blocks and townhouses. Each room still gets its own head and its own control. The trade-off is that all the heads depend on one outdoor unit, so if it needs repair, every room is affected. Multi-head systems also need careful sizing, because the outdoor unit has to suit the combination of rooms connected to it.

Which suits which home?

As a rough guide:

  • Splits often suit apartments, smaller homes, households that mostly live in two or three rooms, renovations done in stages, and anyone wanting the lowest upfront cost.
  • Ducted often suits larger family homes with several bedrooms, homes replacing gas ducted heating, people who want even comfort through the whole house, and anyone who wants the system out of sight.

If you're replacing gas ducted heating, ducted reverse-cycle is the most like-for-like option, though splits are worth considering too. Our post on switching from gas ducted heating covers that move in detail.

And if you have solar or are planning it, either option can run on your own daytime power. Running the system on a timer to pre-cool or pre-warm the home while the panels are producing is a simple way to use more of what you generate. Our solar and battery page has more on pairing the two.

Common questions

Is a split system or ducted better for heating in winter?

Both heat well when they're sized correctly. Ducted spreads warmth more evenly through a whole home. Splits heat the room they're in very effectively, but hallways and rooms without a head will stay cooler.

Can I start with splits and add ducted later?

You can, but it's usually better to plan the whole home at once so you don't end up with equipment you no longer need. We're happy to map out a staged plan that makes sense long term.

What brands do you install?

We install Midea air conditioning, including split and ducted reverse-cycle systems. We'll recommend the right model and size for your home after a chat and a home check.

Talk to a local team

We're a Clayton-based team installing split and ducted systems across Melbourne and Victoria, with our own licensed installers rather than subcontractors. Have a look at our heating and cooling options, then get energy advice or call 1300 289 803 and we'll help you pick the right fit.

Keep reading

All posts →

EV charging · 5 min read

Charging Your EV on Solar at Home in Melbourne

How to charge an electric car on solar at home in Melbourne. Granny chargers vs wall chargers, solar-diverting Zappi chargers, batteries and install needs.

Rather just ask?

Our team is happy to talk it through. No pressure, just honest advice for your home.