Hot water heat pumps

Hot showers for a fraction of the power.

A heat pump pulls heat from the air into your water, so it uses a fraction of the power of an old electric tank and gets you off gas.

  • Up to 300% energy efficient
  • Runs beautifully on solar
  • Rebate eligible

5.0 on Google

12,000+ happy customers

Rather have a chat? Call 1300 289 803

Get hot water advice

We’ll give you a call first to talk it through

Already got solar? *

Honest advice · We’ll call you first · Local Clayton team

Rather have a chat? Call 1300 289 803

How it works

Like a fridge, running in reverse.

The electricity mostly moves heat rather than making it. That’s why heat pumps are so efficient.

  1. Air in

    A fan draws outside air across a coil filled with refrigerant.

  2. Heat soaked up

    The refrigerant absorbs heat from that air, even when it feels cool outside.

  3. Compressed

    A compressor squeezes the refrigerant, which raises its temperature further.

  4. Into your water

    That heat passes into the water in the tank, and the cycle repeats.

Why switch

Cheaper hot water, without the gas.

Hot water is one of the biggest energy users in most homes. A heat pump is one of the simplest ways to cut it.

Heat pumps we install

Emerald
Get hot water advice
  • Up to 300% efficient

    An old electric tank turns one unit of power into one unit of heat. A heat pump typically moves three to four.

  • Off gas for good

    Swapping gas hot water is often the first step to an all-electric home, with no more gas supply charge once the last appliance goes.

  • Hot water from your own sunshine

    Set the timer to heat the tank in the middle of the day, while your panels are producing.

  • Rebate eligible

    Solar Victoria, the Victorian Energy Upgrades program and federal STCs can cut the upfront cost. We’ll confirm what applies.

Sizing

What size tank do you need?

A rough guide by household. Long showers, teenagers or heating mostly on solar can push you up a size.

1–2 people

150–200L

A smaller tank suits singles and couples.

3–4 people

250–270L

Around this size for a typical family of three or four.

5+ people

300L+

Bigger households, or homes heating the tank mostly on solar.

These are starting points, not rules. We’ll talk through your habits and recommend a size that fits.

How it works

A swap that’s often done in a day.

A straightforward swap is often done within a day. A new spot or extra plumbing or electrical work can take a little longer.

The Ackwire Energy base and work van on Garden Rd, Clayton
  1. Step-01

    A chat first, then a home check

    • We give you a call to talk about your household and how you use hot water
    • We find a spot with good airflow, away from bedroom windows
    • We recommend a tank size that fits
  2. Step-02

    Installed by our own team

    • Your old gas or electric system removed
    • The heat pump installed, often near the old spot to keep plumbing short
    • Condensation drainage sorted properly
  3. Step-03

    Set up to save

    • The timer set for your solar or off-peak hours, not left on the factory default
    • We show you how it all works
    • Our Clayton team is only a phone call away afterwards
★★★★★
“I had a heat pump installed by Ackwire, and it’s been the perfect solution for year-round comfort. Their advice was honest, pricing was fair, and the install team was fantastic. Highly recommended.”
Sarah JFootscray

FAQs

Heat pump questions

Can’t see yours? Give us a bell on 1300 289 803 and we’ll help you out.

Get in touch
Will a heat pump work in a Melbourne winter?

Yes. Modern heat pumps are designed to keep working in cold weather. Efficiency drops as the air gets colder, so running it during the warmer part of the day and choosing a tank with a comfortable buffer both help. Read more in heat pump hot water explained.

Will I run out of hot water?

Not if the tank is sized well for your household and the timer is set sensibly. Running short usually points to a tank that’s too small or a timer that needs adjusting.

Is a heat pump noisy?

It makes some noise while it runs, broadly similar to the outdoor unit of a split system. We’ll suggest a spot away from bedrooms, and running it during the day keeps it quiet at night.

How long does it take to install?

A straightforward swap is often done within a day. It can take longer if the unit is going in a new spot or extra plumbing or electrical work is needed.

Which brand do you install?

We install Emerald heat pump hot water systems.

Do you have payment options?

Yes. We have payment options, including bill matching, so your upgrade can work with your budget and your savings. Let’s talk and we’ll walk you through them.

Let’s talk hot water.

Hot showers for a fraction of the power. We’ll look after you from the first chat to the final install.