Set up SOLARMAN Smart for your SOFAR system
Connect your monitoring account to the correct installation and data logger.
Before you start
For SOFAR installations supplied with a SOLARMAN-compatible logger. Confirm your logger model first. Have its serial number and Wi-Fi details ready.
Follow these steps
- 1
Check for an existing plant
Use the account or plant Ackwire has already supplied. If none is available, install SOLARMAN Smart and register using email.
- 2
Create a plant only if required
Choose Add Now, or + then Create a Plant. Ask Ackwire which installer support option to use. Enter the location, time zone, capacity and system details from your installation documents.
- 3
Add the logger
Select the correct plant and Add a Logger. Scan or enter the logger serial number. Use the logger label or a serial number confirmed by Ackwire, rather than assuming the inverter number is the same.
- 4
Connect a supported Wi-Fi logger
Where Networking Configuration is available, use your 2.4 GHz home Wi-Fi and follow the prompts. Connect your phone to the indicated AP_ network when asked, then return to SOLARMAN Smart.
- 5
Check for data
After configuration, allow about 10 minutes for data to update. If the logger stays offline, record the error and contact us. If it is already linked, use the related guide below.
Official sources & version information
SOFAR: SOLARMAN Smart app manual ↗SOLARMAN: Network Settings ↗Checked 11 November 2026. Match the guide to your model and app version.