Help Centre›Emerald Support›Emerald heat pump: not enough hot water

Emerald heat pump: not enough hot water

Start by checking the model and what you can see on the controller. Tell us promptly if you have no hot water.

Conceptual illustration for Emerald heat pump: not enough hot water
Guide illustration · not an app screenshot
Before you start

For Emerald All-In-One Pro and Select models covered by the July 2026 user guide. Split systems need their own manual.

Follow these steps

  1. 1

    Record the symptoms

    Note the model, any error code, controller temperature and when hot water runs out.

  2. 2

    Check recovery conditions

    High use, colder weather or a power interruption can delay recovery. Keep the external air inlet and outlet clear.

  3. 3

    Review heating schedules

    Note controller timers and app Smart Actions. Ask Ackwire to check conflicting schedules or a controlled-load supply.

  4. 4

    Check the model’s Boost option

    Emerald recommends Boost before high demand. Confirm the correct mode for your model in its manual; heating behaviour varies.

  5. 5

    Get help if it persists

    If stored water looks hot but taps remain cool, contact Ackwire or a licensed plumber. Do not adjust the tempering valve.

For smoke, burning smells, sparking, damage or persistent faults, stop using the unit and follow the manufacturer’s safety guidance; isolate power only if safe. Do not open covers or repeatedly reset a tripping circuit.
Official sources & version informationEmerald All-In-One Pro and Select user guide, July 2026 ↗Emerald winter tips, May 2026 ↗

Checked 11 November 2026. Match the guide to your model and app version.