Help Centre›Emerald Support›Pair your Emerald heat pump app

Pair your Emerald heat pump app

Get your monitoring connected using the pairing guide for your heat pump.

Conceptual illustration for Pair your Emerald heat pump app
Guide illustration · not an app screenshot
Before you start

For supported Emerald All-In-One Pro and Select controllers. Check the unit label and matching official guide first. Split systems are outside this guide.

Follow these steps

  1. 1

    Prepare your phone

    Open Emerald App and sign in or register. Use 2.4 GHz Wi-Fi, enable Bluetooth and have the Wi-Fi password, model, serial number and installation date ready.

  2. 2

    Prepare the controller

    The unit must be powered and its display active. On the matching All-In-One controller, hold Power for 5 seconds to unlock it.

  3. 3

    Add the product

    Tap + → Add Product → Heat Pump. Scan the nameplate QR code, or use Manual Setup and select the exact model.

  4. 4

    Choose a pairing method

    Follow the matching controller instructions. Bluetooth uses Power + Up; AP uses Power + Down. The standalone pairing guide specifies holding both buttons for 5 seconds. Confirm the Wi-Fi symbol flashes.

  5. 5

    Complete setup

    Follow the app prompts, enter Wi-Fi details and confirm the serial number and installation date. An installer reference code, if provided, is optional in the July 2026 guide.

Pairing expires after about 2 minutes; re-enter pairing mode if needed. Stay within 1 metre for Bluetooth. If it fails, record the model and exact screen, and contact Ackwire. The model-specific user guide includes further re-pairing troubleshooting.
Official sources & version informationEmerald All-In-One app pairing guide ↗Emerald All-In-One Pro and Select user guide, July 2026 ↗

Checked 11 November 2026. Match the guide to your model and app version.